TC31 Documents

TC31 Documents (ISO Standards can be purchased from ANSI, www.ansi.org )

TC31 N1307 - CD Consultation - ISO/CD 28580 - Passenger car, truck and bus tyre rolling resistance measurement method - Single point test and correlation of measurement results

TC31 N1306 - CD Consultation - ISO/CD 18164 - Motorcycle tyres - Methods of measuring rolling resistance

TC31 N1305 - TC31/SC6 Chair Reappointment - Carol Hochu

TC31 N1304 - SoV - TC31/N1303 Extension of TC31 Convenors

TC31 N1303 - Re-appointment of TC31 Convenors and Chairs

TC31 N1302 - Form13 - ISO/DIS 15222 (Ed 3)

TC31 N1301 - SoV on TC31/N1300 - Proposed Resolutions to Revise ISO 28580 and ISO 18164

TC31 N1300 - Proposed Resolutions to Revise ISO 28580 and ISO 18164

TC31 N1299 - Form08A Committee Decision for DIS 15222

TC31 N1298 - CD Consultation - ISO/CD 4223-1 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres

TC31 N1297 - RoV on ISO/CD 15222 - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres

TC31 N1296 - SoV on TC31/N1294 - TC31/SC7 Chair appointment

TC31 N1295 - No assigned document

TC31 N1294 - Nomination of TC31/SC7 Chair

TC31 N1293 - SoV ISO/CD 18106 - Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres

TC31 N1292 - CD Consultation - ISO/CD 15222 - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres

TC31 N1291 - Form 08A Committee Decision for DIS - Tyre abrasion rate measurement methods - Part 1: Outdoor test method by using vehicles on road

TC31 N1290 - Form 08A Committee Decision for DIS - Tyre abrasion rate measurement methods - Part 2: Indoor test method by using an abrasion tester on external drum

TC31 N1289 - CD Consultation - ISO 18106 - Passenger car, commercial vehicle, truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyres

TC31 N1288 - SoV on Systematic Review of ISO 18106:2016

TC31 N1287 - SoV on TC31/N1283 - CIB - Proposed DPAS - Angular Sweep Test Methods for RFID Enabled Tyres

TC31 N1286 - Results of TC31/N1281 - CD Consultation - ISO 18511-1

TC31 N1285 - TC31 Meeting Report 25th Meeting - 2023-06-16 - Berlin Germany

TC31 N1284 - Results of TC31/N1249 - CD Consultation - ISO 18511-2

TC31 N1283 - CIB - Proposed DPAS - Angular Sweep Test Methods for RFID Enabled Tyres

TC31 N1282 - Withdrawal of TC31/N1263 - DPAS Angular Sweep Test Methods for RFID Enabled Tyres

TC31 N1281 - CD Consultation - ISO 18511-1 - Tyre abrasion rate measurement methods - Part 1: Outdoor test method by using vehicles on road

TC31 N1280 - TC31 Plenary, June 2023 Attendance List

TC31 N1279 - 2023 Liaison Report - ETRTO

TC31 N1278 - TC31 Resolutions - Berlin, Germany - 16 June 2023

TC31 N1277 - TC31/WG13 Report to the June 2023 Plenary

TC31 N1276 - TC31 Meeting Agenda - 16 June 2023 - Revised with Additional Documents

TC31 N1275 - TC31/SC3 Report to the June 2023 Plenary

TC31 N1274 - TC31/WG10 and WG11 Reports to the June 2023 Plenary

TC31 N1273 - TC31/WG8 Report to the June 2023 Plenary

TC31 N1272 - TC31/SC9 Report to the June 2023 Plenary

TC31 N1271 - ISO Directives 2023 Update - Changes in 2023 Edition

TC31 N1270 - TC31/SC6 Report to June 2023 Plenary, Replaces N1258

TC31 N1269 - TC31/SC3 Report to the June 2023 Plenary

TC31 N1268 - TC31/SC4 Report to the June 2023 Plenary

TC31 N1267 - TC31/SC5 Report to the June 2023 Plenary

TC31 N1266 - TC31/SC10 Report to the June 2023 Plenary

TC31 N1265 - Meeting Schedule and Logistics - 2023 TC31 and Associated meetings - Berlin - Week of 12 June 2023

TC31 N1264 - 2023 Liaison Report - GDSO

TC31 N1263 - DPAS Ballot - Angular Sweep Test Methods for RFID enabled tyres

TC31 N1262 - SoV - TC31/N1228 - Nomination of TC31/SC5 Chair

TC31 N1261 - 2023 Liaison Report - ETRTO

TC31 N1260 - TC31 - Meeting Agenda - 16 June 2023 - Revised

TC31 N1259 - TC31/SC7 Report to June 2023 Plenary

TC31 N1258 - TC31/SC6 Report to June 2023 Plenary, Replaced by N1270

TC31 N1257 - 2023 Liaison Report - ISO/TC43/SC1 - Noise

TC31 N1256 - ISO/TC31 Secretariat Report - Berlin 2023 Revised

TC31 N1255 - ISO/TC31 Secretariat Report - Berlin 2023 (Replaced by N1256)

TC31 N1254 - Confirmation of TC31 Subcommittee Scopes

TC31 N1253 - Form21 - ISO 4223-2:1991 (Ed 2, vers 6)

TC31 N1252 - Form21 - ISO 4223-1:2017 (Ed 5)

TC31 N1251 - Form21 - ISO 3877-4:1984 (Ed 1, vers 6)

TC31 N1250 - Form21 - ISO 3877-3:1978 (Ed 1, vers 6)

TC31 N1249 - CD Consultation - ISO 18511-2 - Tyre abrasion rate measurement methods - Part 2: Indoor test method

TC31 N1248 - 2023 Liaison Report - ICO/TC45 - Rubber and rubber products

TC31 N1247 - RoV - TC31/N1243 - Nomination of TC31/SC3 Chair

TC31 N1246 - 2023 Liaison Report - JTC 1-SC 31 Liaison Report

TC31 N1245 - 2023 Liaison Report - TC 127 Earth-moving machinery

TC31 N1244 - Revised Schedule - TC 31 and Associated SC and WG Meetings - Berlin Germany 12-16 June 2023

TC31 N1243 - Nomination of TC31/SC3 Chair

TC31 N1242 - Revised Schedule - TC31 and Associated SC and WG Meetings Berlin Germany 12-16 June 2023

TC31 N1241 - SoV TC31/N1237 - Proposed Resolution to Establish Ad Hoc Group: Map Tyre Sizes in Multiple TC31/SCs

TC31 N1240 - SoV TC31/N1236 - Proposed Resolution to Disband TC31/WG9 - Pneumatic tubes and flaps for automotive vehicles

TC31 N1239 - SoV TC31/N1234 - Proposed Resolution to Revise ISO 19447:2021 - Method for measuring ice grip

TC31 N1238 - SoV - TC31/N1232 - Nomination of TC31/WG6 Convenor

TC31 N1237 - Proposed Resolution to Establish Ad Hoc Group - Map Tyre Sizes in Multiple TC31-SCs

TC31 N1236 - Proposed Resolution to Disband TC31/WG9 - Pneumatic tubes and flaps for automobile vehicles

TC31 N1235 - ISO/TC31 - Meeting Agenda - 16 June 2023

TC31 N1234 - Proposed Resolution to Revise - ISO 19447:2021

TC31 N1233 - Plenary Announcement - TC31 and Association SC and WG Meetings - Berlin, Germany 12-16 June 2023

TC31 N1232 - Nominatino of TC31/WG6 Convenor

TC31 N1231 - SoV TC31/N1230 - Re-appointment of TC31 WG convenors

TC31 N1230 - Re-appointment of TC31 convenors

TC31 N1229 - SoV on TC31/N1227 - Nomination of TC31/SG8 Convenor

TC31 N1228 - Nomination of TC31/SC5 Chair

TC31 N1227 - Nomination of TC31/WG8 Convenor

TC31 N1226 - SoV - TC31/N1217 - Ballot to establish TC31/WG13 - Tyre abrasion measurement

TC31 N1225 - Form6 - ISO/NP 18511-2

TC31 N1224 - Form6 - ISO/NP 18511-1

TC31 N1223 - SoV - TC31/N1211 - Request from GDSO for Category A Liaison to TC31

TC31 N1222 - Resolution to Revise ISO 18106:2016

TC31 N1221 - Request for GDSO for Category A Liaison to TC31

TC31 N1220 - Appointment of ISO/TC31/WG8 Project Leader for ISO 24469

TC31 N1219 - SoV - TC31/N1211 - Nomination or TC31/SC10 Chair (replacement)

TC31 N1218 - SoV - TC31/N1210 - Nomination of TC31/SC4 Chair

TC31 N1217 - Ballot to establish TC31/WG13 - Tyre abrasion measurement

TC31 N1216 - Form4 - ISO 18511-2

TC31 N1215 - Form4 - ISO 18511-1

TC31 N1214 - Appointment of ISO/TC31/WG8, ISO 24469 Project Leader

TC31 N1213 - Form13 - ISO/DIS 24469

TC31 N1212 - Form13 - ISO/DIS 21634

TC31 N1211 - Nomination of TC31/SC10 Chair

TC31 N1210 - Nomination of TC31/SC4 Chair

TC31 N1209 - Form13 - ISO 13325:2019 DAmd1

TC31 N1208 - Call for Project Leader as a result of Systematic Review voting result - ISO 18106:2016

TC31 N1207 - Systematic Review voting result - ISO 18106:2016

TC31 N1206 - SoV - TC31/N1202 - Nomination of TC31/SC5 Chair

TC31 N1205 - SoV - TC31/N1200 - Nomination of TC31/SC6 Chair

TC31 N1204 - SoV - TC31/N1199 - Appointment of TC31/SC9 Chair

TC31 N1203 - SoV - TC31/N1197 - Appointment of TC31/WG12 Convenor

TC31 N1202 - Nomination of TC31/SC5 Chair (replaces N1201)

TC31 N1201 - Nomination of TC31/SC5 Chair

TC31 N1200 - Nomination of TC31/SC6 Chair

TC31 N1199 - Nomination of TC31/SC9 Chair

TC31 N1198 - Nomination of TC31/WG12 Convenor (replaces N1197)

TC31 N1197 - Nomination of TC31/WG12 Convenor

TC31 N1196 - SoV - ISO/FDIS 19447

TC31 N1195 - TC 31 Resolutions - 10 June 2021 Virtual Meeting - FINAL

TC31 N1194 - Form13 - ISO/DIS 20908

TC31 N1193 - TC 31 Resolutions - 10 June 2021 Virtual Meeting

TC31 N1192 - TC 31 Plenary Meeting Agenda - June 2021 Revised

TC31 N1191 - Form21 - ISO 3877-1:1997 Ed2 Vers4

TC31 N1190 - Form21 - ISO 3877-2:1997 Ed2 Vers4

TC31 N1189 - Form21 - ISO 17464:2016 Ed1

TC31 N1188 - TC 31/WG 9 Report to June 2021 Plenary

TC31 N1187 - TC 31/SC 9 Report to June 2021 Plenary

TC31 N1186 - TC 31/SC 3 Report to June 2021 Plenary

TC31 N1185 - TC 31/SC 6 Report to June 2021 Plenary

TC31 N1184 - TC 31 Secretariat Report to June 2021 Plenary

TC31 N1183 - TC 31 Plenary Meeting Agenda - June 2021 - Revised

TC31 N1182 - TC 31/SC 10 Report to June 2021 Plenary

TC31 N1181 - TC 31/SC 7 Report to June 2021 Plenary

TC31 N1180 - TC 31/SC 5 Report to June 2021 Plenary

TC31 N1179 - TC 31/SC 4 Report to June 2021 Plenary

TC31 N1178 - SoV - TC 31/N1171 - Resolution on ISO/NP 21634 - Rubber flaps for automotive vehicles - Technical requirements and test methods

TC31 N1177 - TC 31 Plenary Meeting Agenda - June 2021

TC31 N1176 - SoV - TC 31/N1174 - Nomination of TC 31/SC 7 Chair

TC31 N1175 - SoV - TC 31/N1173 - Nomination of TC 31/SC 10 Chair

TC31 N1174 - Nomination of TC 31/SC 7 Chair

TC31 N1173 - Nomination of TC 31/SC 10 Chair

TC31 N1172 - Form13 - ISO/DIS 19447

TC31 N1171 - Committee Internal Ballot (CIB) - Resolution on ISO/NP 21634

TC31 N1170 - SoV - TC31/N1161 and N1162 - Form04 ISO/DIS 21634

TC31 N1169 - SoV on TC31/N1167 - Register PWI for Revision of ISO 20912

TC31 N1168 - RoV ISO/DIS 15222

TC31 N1167 - Register PWI for Revision of ISO 20912

TC31 N1166 - SoV TC31/N1157 - Nomination of TC31/WG6 Convenor

TC31 N1165 - Nomination of TC31/SC3 Chair

TC31 N1164 - SoV on CIB ISO/DIS 13325 Amendment Uncertainties and Corrections

TC31 N1163 - RoV ISO/NP 5273 Form06

TC31 N1162 - ISO/DIS 21634 Mark-up

TC31 N1161 - ISO/DIS 21634 Form04 NWIP

TC31 N1160 - SoV TC 31 N1157 Nomination of TC 31/WG 6 Convenor

TC31 N1159 - Announcement of migration to ISO Document site

TC31 N1158 - CIB - ISO/DIS 13325 - Amendment Uncertainties and Corrections

TC31 N1157 - Nomination of TC 31/WG 6 Convenor

TC31 N1156 - DIS 23671 Form13

TC31 N1155 - SoV on TC 31/N 1145 - CD 24469 - Road wear test of studded tyres

TC31 N1154 - ISO/CD 24469 Form08A

TC31 N1153 - SoV on TC 31/N 1148 - Ballot on project ISO/DIS 21634 - Rubber flaps for automotive vehicles

TC31 N1152 - ISO - Covid-19 Measures - FAQ

TC31 N1151 - Working draft for ISO/NP 5273 - Artificially worn methods of passenger car tyres for relative wet, ice and snow grip performance

TC31 N1150 - ISO/NP 5273 - Artificially worn methods of passenger car tyres for relative wet, ice and snow grip performance

TC31 N1149 - SoV - ISO 4223-2:1991 DAmd1 Ed2 - Definition of some terms used in the tyre industry - Part 2: Solid tyres - Amendment 1

TC31 N1148 - Ballot on project ISO/DIS 21634 - Rubber flaps for automotive vehicles

TC31 N1147 - Summary of voting on ISO 3877-4:1984 DAmd1 - Form13

TC31 N1146 - ISO Participation Guidelines for Virtual Meetings

TC31 N1145 - ISO/CD 24469 - Road wear test of studded tyres

TC31 N1144 - SoV - TC31/N1137 - Appointment of TC31/WG8 Convenor

TC31 N1143 - RoV - CD 15222 Form 08A

TC31 N1142 - ISO/CD 15222 - Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres

TC31 N1141 - DIS 20912 Form13

TC31 N1140 - DIS 20911 Form13

TC31 N1139 - Updated text of ISO/DIS 21634 - Rubber flaps for automotive vehicles - Technical requirements and test methods

TC31 N1138 - NP 24469 Form06

TC31 N1137 - Nomination of TC 31/WG 8 Convenor

TC31 N1136 - Re-Appointment of ISO/TC 31 Convenors

TC31 N1135 - NP 19447 Form06

TC31 N1134 - NP 20908 Form06

TC31 N1133 - RoV ISO/CD 4223-2:1991 Amd 1

TC31 N1132 - RoV ISO/CD 3877-4:1984 Amd 1

TC31 N1131 - NP 19447 - Passenger car tyres - Method for measuring ice grip performance - Loaded new tyres

TC31 N1130 - ISO 20908 - Explanation and Status of project

TC31 N1129 - NP 20908 - Drum method for measurement of tyre-to-road coast-by sound emission

TC31 N1128 - NWIP - Road wear test of studded tyres

TC31 N1127 - ISO 3877-4:1984/CD Amendment 1 - Tyres, valves and tubes - List of equivalent terms - Part 4: Solid tyres

TC31 N1126 - ISO 4223-2:1991/CD Amendment 1 - Defintions of some terms used in the tyre industry - Part 2: Solid tyres

TC31 N1125 - SoV on TC31 N1097 - Request to restart ISO/WD 19447

TC31 N1124 - TC31 Resolutions - Kanazawa Japan 7 June 2019

TC31 N1123 - TC31/WG8 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1122 - TC31 Plenary Meeting Agenda - Final - 7 June 2019

TC31 N1121 - 2019 Liaison Report - ISO TC43/SC1 - Noise

TC31 N1120 - Road wear test of studded tires - Presentation by the National Body of Finland to TC31 - Kanazawa Japan

TC31 N1119 - List of delegates to the TC31 Plenary 7 June 2019 as of 2019-05-29

TC31 N1118 - TC31 Plenary Meeting Agenda - 7 June 2019

TC31 N1117 - ISO IEC Directives Update from ISO to TC31

TC31 N1116 - 2019 Liaison Report - TC45 Rubber and Rubber Products

TC31 N1115 - 2019 Liaison Report - TC127 Earth-moving machinery

TC31 N1114 - TC31 Plenary Meeting Agenda - 7 June 2019

TC31 N1113 - Report of Ad Hoc Group meeting on ISO/TC31 Scope

TC31 N1112 - TC31/WG11 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1111 - TC31/SC3 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1110 - SoV - TC31/N1096 - Nomination of the TC31/SC6 Chair

TC31 N1109 - TC31/SC10 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1108 - TC31/SC6 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1107 - TC31/SC5 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1106 - TC31/SC4 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1105 - TC31/SC8 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1104 - TC31/SC7 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1103 - TC31/WG10 Report to the 7 June 2019 TC31 Plenary Meeting

TC31 N1102 - SoV on TC31 N1093 - Request to Restart ISO 20908 - Tyre sound emission test - Methods of drum

TC31 N1101 - SoV on TC31 N1092 - Proposed Change to Title and Scope - ISO 20912

TC31 N1100 - SoV on TC31 N1091 - Proposed Change to Title and Scope - ISO 20911

TC31 N1099 - Status of Ad Hoc Group on TC31 Scope Revision (replaces N1098)

TC31 N1098 - Status of Ad Hoc Group on TC31 Scope Revision (replaced by N1099)

TC31 N1097 - Request to Restart - ISO/WD 19447 - Passenger car - Methods for measuring ice grip performance - Loaded new tyres

TC31 N1096 - Nomination of the TC31/SC6 Chair for an additional 3 years

TC31 N1095 - Proposed Revision to the ISO/TC31 Strategic Business Plan

TC31 N1094 - ISO/TC31 Secretariat Report to the TC31 Plenary meeting - Japan - 7 June 2019

TC31 N1093 - Request to Restart ISO 20908 - Tyre sound emission test - Methods of drum

TC31 N1092 - Proposed Change to Title and Scope - ISO 20912

TC31 N1091 - Proposed Change to Title and Scope - ISO 20911

TC31 N1090 - CD 20912 Form 08A

TC31 N1089 - CD 20911 Form 08A

TC31 N1088 - SoV - TC31 N1084 - Appointment of TC31 WG12 Convenor

TC31 N1087 - SoV - TC31 N1083 - Nomination of the TC31 SC9 Chair

TC31 N1086 - TC31 Meeting Logistical Information - Kanazawa, Japan Meeting

TC31 N1085 - SoV on ISO/DIS 21634 - Rubber flaps for automotive vehicles - Technical requirements and test methods

TC31 N1084 - Appointment of the TC31 WG12 Convenor

TC31 N1083 - Nomination of the TC31 SC9 Chair

TC31 N1082 - OIML - Metrological requirements and controls for tire pressure measuring instruments - Invitation for TC31 comments

TC31 N1081 - SoV on Ad Hoc Group on TC31 Scope Revision

TC31 N1080 - SoV on TC31 N1077 - Proposed Convenor for TC31 Ad Hoc Group - Tyre Noise Test Exchange

TC31 N1079 - SoV on Systematic Review of ISO 3324-2:2013 Ed 3

TC31 N1078 - SoV on Systematic Review of ISO 3324-1:2013 Ed 5

TC31 N1077 - Proposed convenor for TC31/Ad Hoc Group (Tyre Noise Test exchange)

TC31 N1076 - SoV on ISO 20912.2 - Testing methods for radio frequency identification (RFID) tyre tags

TC31 N1075 - SoV on ISO 20911.2 - Embedding methods for radio frequency identification (RFID) tyre tags

TC31 N1074 - Meeting Logistical Information Kanazawa, Japan Meeting

TC31 N1073 - TC 31 Plenary meeting agenda - 7 June 2019

TC31 N1072 - SoV - Nomination of the TC 31/SC 7 Chair - 3 year extension (2019-2021)

TC31 N1071 - SoV - TC 31 Proposed revision of scope

TC31 N1070 - Nomination of the TC 31/SC 7 Chair - 3 year extension (2019-2021)

TC31 N1069 - ISO/CD 20912 - Conformity requirement and performance measurement methods of RFID enabled tyre - Second CD

TC31 N1068 - ISO/CD 20911 - Radio Frequency IDentification (RFID) tyre tags - Tyre attachment classification - Second CD

TC31 N1067 - RoV - Additional comment file from UK on CD 23671

TC31 N1066 - RoV - Comment files on CD 23671

TC31 N1065 - RoV CD 23671 Form 8A

TC31 N1064 - RoV - Comment files on DIS 13325

TC31 N1063 - RoV on DIS 13325

TC31 N1062 - Disposition of comments on ISO CD 21634 - Rubber flaps for automotive vehicles - Technical requirements

TC31 N1061 - TC31 Proposed Revision of Scope

TC31 N1060 - ISO CD 23671 - Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres

TC31 N1059 - SoV on Systematic Review of ISO 15222 Form21

TC31 N1058 - SoV on Systematic Review of ISO 18164 Form21

TC31 N1057 - RoV ISO/DIS 20910

TC31 N1056 - RoV ISO/DIS 20909

TC31 N1055 - SoV on Systematic Review of ISO 4223-2 Form21

TC31 N1054 - ISO CD 21634 From08A

TC31 N1053 - ISO 3877-4:1984 (ed 1) Form21

TC31 N1052 - ISO CD 20912 - Conformity requirement and performance measurement methods of RFID enabled tyre

TC31 N1051 - ISO CD 20911 - RFID - Tyre attachment classification

TC31 N1050 - Disposition of comments on ISO CD 13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound

TC31 N1049 - ISO CD 13325 Form08A

TC31 N1048 - SoV - TC31 N1044 - Nomination of the TC31 SC10 Chair

TC31 N1047 - SoV - TC31 N1043 - Nomination of the TC31 SC8 Chair

TC31 N1046 - SoV - TC31 N1042 - Nomination of the TC31 SC4 Chair

TC31 N1045 - DIS 28580 Form13

TC31 N1044 - Nomination of the TC 31/SC 10 Chair

TC31 N1043 - Nomination of the TC 31/SC 8 Chair

TC31 N1042 - Nomination of the TC 31/SC 4 Chair

TC31 N1041 - RoV ISO/CD 20910 - Radio frequency identification RFID tyre tags

TC31 N1040 - RoV ISO/CD 20910 - Coding for radio frequency RFID tyre tags

TC31 N1039 - RoV ISO/DIS 28580 - Tyre rolling resistance measurement methos -- Single point test and measurement

TC31 N1038 - SoV on ISO/CD 20910 - Coding for radio frequency RFID tyre tags

TC31 N1037 - SoV on ISO/CD 20909 - Radio frequency identification RFID tyre tags

TC31 N1036 - ISO CD 13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound emissions

TC31 N1035 - ISO CD 21634 - Rubber flaps for automotive vehicles -- Technical requirements and test methods

TC31 N1034 - SoV on Systematic Review of ISO 3877-3:1978 Ed 1 Form21

TC31 N1033 - SoV on TC31 N1026 - Request for Liaison with ISO TC31 WG10 from GS1

TC31 N1032 - ISO CD 20910 - Coding for Radio frequency identification RFID tyre tags

TC31 N1031 - ISO CD 20909 - Radio frequency identification RFID tyre tags

TC31 N1030 - Disposition of comments on ISO CD 20910 - Coding for Radio frequency identification RFID tyre tags

TC31 N1029 - Disposition of comments on ISO CD 20909 - Radio frequency identification RFID tyre tags

TC31 N1028 - ISO TC31 Tyres Rims and Valves - Meeting Report 23rd meeting 2017-05-19 - Seattle Hilton

TC31 N1027 - Call for Experts to Participate in WG12 - Methods for Measuring Relative Wet Grip Performance

TC31 N1026 - Request for Liaison with ISO TC31 WG10 from GS1

TC31 N1025 - SoV on ISO CD 20910 - Coding for Radio frequency identification RFID tyre tags

TC31 N1024 - SoV on ISO CD 20909 - Radio frequency identification RFID tyre tags

TC31 N1023 - Activation of a new WG under TC31 and Amendment of ISO 23671

TC31 N1022 - TC31 WG8 Report to the 19 May 2017 TC31 Plenary Meeting

TC31 N1021 - TC31 WG10 Report to the 19 May 2017 TC31 Plenary Meeting - REVISED

TC31 N1020 - TC31 Resolutions - Seattle US May 2017

TC31 N1019 - TC31 Plenary Meeting Agenda - Revised - 19 May 2017

TC31 N1018 - TC31 SC8 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1017 - TC31 SC9 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1016 - TC31 SC3 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1015 - TC31 SC6 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1014 - TC31 SC7 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1013 - TC31 SC10 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1012 - TC31 SC5 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1011 -TC31 SC4 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1010 - TC31 WG1 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1009 - TC31 WG11 Report to the 19 May 2017 TC31 Plenary meeting

TC31 N1008 - 2017 Liaison Report - ISO TC110 - Powered industrial trucks

TC31 N1007 - 2017 Liaison Report - ISO TC45 - Rubber and rubber products

TC31 N1006 - 2017 Liaison Report - ETRTO to ISO TC31 - Seattle Plenary meeting 2017

TC31 N1005 - Updates to ISO Technical Committees from ISO

TC31 N1004 - Revised list of delegates to the ISO TC31 Plenary 19 May 2017 as of 2017-05-09

TC31 N1003 - TC31 WG10 Report to the 19 May 2017 Plenary Meeting

TC31 N1002 - Preliminary list of delegates to the ISO TC31 Plenary 19 May 2017 as of 2017-05-03

TC31 N1001 - Explanatory report on ISO CD 28580

TC31 N1000 - TC31 Plenary Meeting Agenda Revised 19 May 2017

TC31 N999 - SoV on ISO/FDIS 16392 - Tyres -- Electrical resistance -- Test methods

TC31 N998 - ISO/TC 31 Secretariat Report to the TC 31 Plenary meeting - Seattle

TC31 N997 - 2017 Liaison Report - ISO/TC 127 Earth-moving machinery

TC31 N996 - Disposition of Comments on ISO DIS 16392 Ed 2

TC31 N995 - Result of Voting ISO DIS 4223-1 Form13

TC31 N994 - ISO CD 20910 Coding for RFID tyre tags

TC31 N993 - ISO CD 20909 RFID tyre tags

TC31 N992 - Meeting Information ISO TC31 WG10 and WG11 Seattle May 2017

TC31 N991 - TC31 Meeting Logistical Information

TC31 N990 - TC31 Plenary Meeting Agenda

TC31 N989 - SoV - TC31 N987 Re-Appointment of TC31 WG Chairs

TC31 N988 - SoV - TC31 N986 Extension of ISO TC31 Chairman Term of Office

TC31 N987 - Re-Appointment of TC31 WG Convenors

TC31 N986 - Extension of ISO TC31 Chairman Term of Office

TC31 N985 - Summary of Voting - TC31 N981 - Nomination of the SC7 Chair

TC31 N984 - Summary of Voting - TC31 N980 - Nomination of the SC6 Chair

TC31 N983 - Summary of Voting - TC31 N979 - Nomination of the SC5 Chair

TC31 N982 - Result of Voting - TC31 N982 - Rubber flaps for automotive vehicles

TC31 N981 - Nomination of the TC31 SC7 Chair

TC31 N980 - Nomination of the TC31 SC6 Chair

TC31 N979 - Nomination of the TC31 SC5 Chair

TC31 N978 - Result of Voting on NWIP Revision ISO 1332 - Tyres - Coast-by methods for measurement of tyre-to-road sound emission

TC31 N977 - Result of Voting TC31 N956 - Relinquishment of TC31 SC5 and SC7

TC31 N976 - NWIP - Rubber flaps for automotive vehicles

TC31 N975 - Summary of Voting CIB ISO 18164

TC31 N974 - Summary of Voting CIB ISO 13326

TC31 N973 - Summary of Voting TC31 N962 - TC31/WG11 convenor nomination

TC31 N972 - Summary of Voting TC31 N961 - TC31/WG10 convenor nomination

TC31 N971 - CIB - ISO 18164 - Passenger car, truck, bus and motorcycle rolling resistance

TC31 N970 - CIB - ISO 13326 - Test methods for measuring tyre uniformity

TC31 N968 - Result of systematic review - ISO 3877-2

TC31 N967 - Result of systematic review - ISO 3877-1

TC31 N965 - NWIP Revision ISO 13325 - Tyres - Coast-by noise measuring

TC31 N964 - Summary of Voting on TC31 N955 - ISO CD 28580

TC31 N963 - Announcement of 2017 ISO TC31 Plenary Date

TC31 N962 - Nomination of TC31 WG11 Co-convenor

TC31 N961 - Nomination of TC31 WG10 Co-convenor

TC31 N960 - Summary of Voting on TC31 N952 - ISO CD 4223-1

TC31 N959 - Summary of Voting on TC31 N950

TC31 N958 - Call for experts for WG11

TC31 N957 - Summary of Voting on TC31 N951

TC31 N956 - Relinquishment of TC31 SC5 and SC7

TC31 N955 - ISO CD 28580 - Tyre rolling resistance

TC31 N954 - Call for Experts to Participate in TC31 WG10 - RFID Tyre Tags

TC31 N953 - Summary of Voting on TC31 N950

TC31 N952 - ISO CD 4223-1.2 - Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres

TC31 N951 - Proposal for Establishment of TC31 WG11 - Tyre Noise test - Methods of drum

TC31 N950 - Proposal for Establishment of TC31 WG10 - RFID Tyre Tags (replaces N949)

TC31 N949 - Proposal for Establishment of TC31 WG10 - RFID Tyre Tags

TC31 N948 - ISO DIS 18106 Form13

TC31 N947 - ISO NP 20912 Form06

TC31 N946 - ISO NP 20908 Form06

TC31 N945 - ISO NP 20909 Form06

TC31 N944 - ISO NP 20911 Form06

TC31 N943 - ISO NP 20910 Form06

TC31 N942 - ISO DIS 17464 Form13

TC31 N941 - Committee Internal Ballot CIB on Systematic Review of ISO 18164-2005

TC31 N940 - Testing methods for radio frequency identification RFID tyre tags

TC31 N939 - NWIP Embedding methods for radio frequency RFID tyre tags

TC31 N938 - NWIP Coding for radio frequency identification

TC31 N937 - Radio frequency identification (RFID) tyre tags

TC31 N936 - NWIP Tyre noise test - Methods of drum

TC31 N935 - Notice of approval of TC31 SC4 Convenor

TC31 N934 - Liaison Report from ISO TC22 & TC43 SC1 WG42

TC31 N933 - TC31 SC4 Chairman Nomination

TC31 N932 - TC31 Resolutions - Luxembourg April 2015

TC31 N931 - ISO presentation to TC31 - Luxembourg April 2015

TC31 N930 - TC31 SC9 Report - Luxembourg April 2015

TC31 N929 - TC31 SC6 Report - Luxembourg April 2015

TC31 N928 - TC31 Plenary Meeting Agenda - April 2015

TC31 N927 - TC31 SC3 Report - Luxembourg April 2015

TC31 N926 - TC31 SC10 Report - Luxembourg April 2015

TC31 N925 - TC31 WG2 Report - Luxembourg April 2015

TC31 N924 - TC31 WG1 Report - Luxembourg April 2015

TC31 N923 - TC31 WG8 Report - Luxembourg April 2015

TC31 N922 - TC31 SC4 Report - Luxembourg April 2015

TC31 N921 - TC31 WG6 Report - Luxembourg April 2015

TC31 N920 - Notice of Approval of TC31 SC8 Convener

TC31 N919 - TC31 SC8 Report - Luxembourg April 2015

TC31 N918 - 2015 Liaison Report - ETRTO

TC31 N917 - TC31 Plenary and Associated Meetings - Delegates List

TC31 N916 - Meeting Schedule for Luxembourg 21-24 April 2015

TC31 N915 - Summary of Voting on Committee Internal Ballot on Systematic Review of ISO 28580:2009

TC31 N914 - Systematic Review Summary ISO 28580:2009

TC31 N913 - Systematic Review Summary ISO 18164:2005

TC31 N911 - 2015 Liaison Report - ISO TC110 Industrial Trucks

TC31 N910 - 2015 Liaison Report - ISO TC96 Cranes

TC31 N909 - 2015 Liaison Report - ISO TC43 SC1 Noise

TC31 N908 - 2015 Liaison Report - ISO TC127 Earth-moving machinery

TC31 N907 - Notice of Approval of TC31 SC10 Chairman

TC31 N906 - Notice of Approval of TC31 SC3 Chairman

TC31 N905 - ISO/TC31 Secretariat Report to the TC31 Plenary meeting - Luxembourg 24 April 2015

TC31 N904 - TC31 SC10 Chairman Nomination

TC31 N903 - TC31 SC3 Chairman Nomination

TC31 N902 - Hotel Booking Form - Novotel Luxembourg Kirch

TC31 N901 - Notice of Approal of TC 31 SC 7 Chairman

TC31 N900 - Nomination of TC31 SC8 Chairman

TC31 N899 - TC 31 Plenary Meeting Agenda - 24 April 2015

TC31 N898 - TC 31 Plenary - 2015 Meeting Date and Location

TC31 N897 - Nomination of TC 31 SC 7 Chairman

TC31 N896 - Response to comments submitted on ISO 4223-1

TC31 N895 - Voting results and comments from Systematic Review ISO 28580

TC31 N894 - Notice of Approval of TC 31 SC 3 Convenor

TC31 N893 - ISO DIS 17464E-Pneumatic Tubes for Automotive Vehicles

TC31 N892 - Nomination of TC31 SC3 Convenor

TC31 N891 - SoV and comments on CD 17464

TC31 N890 - Notice of Approval TC31 SC9 Convener

TC31 N889 - Notice of Approval TC31 SC6 WG2 Convener

TC31 N888 - Notice of Approval TC31 WG1 Chairman

TC31 N887 - Nomination of TC31 SC9 Convener

TC31 N886 - Nomination of TC31 SC6 WG2 Convener

TC31 N885 - Nomination of TC31 WG1 Chairman

TC31 N884 - SoV and comments on CD 18106

TC31 N883 - SoV and comments on CD 4223-1

TC31 N882 - ISO NP 19447 Form06

TC31 N881 - Notice of Approval of TC31 SC6 Chairman

TC31 N880 - Notice of Approval of TC31 SC9 Chairman

TC31 N879 - Nomination of TC31 SC6 Chairman

TC31 N878 - Nomination of TC31 SC9 Chairman

TC31 N877 - ISO 4223-1 CD - Definition of terms

TC31 N876 - Notice of Approval of TC31 SC5 Chairman

TC31 N875 - NP 19447 - Method for measuring ice grip performance

TC31 N874 - CD 18106 - Method for measuring snow grip performance

TC31 N873 - Nomination of SC5 Chairman

TC31 N872 - Call for WG1 Experts

TC31 N871 - CD for Pneumatic Tubes Standard

TC31 N870 - Notice of New SC8 Secretary

TC31 N869 - Call for WG9 Experts

TC31 N868 - Call for WG8 Experts

TC31 N867 - ISO CS Presentation 2012

TC31 N866 - TC31 Final Resolutions Kyoto 2012

TC31 N865 - SoV GOST Appeal to TC31 Report of Voting

TC31 N864 - SC9 Proposal Valve Hole Rim Thickness

TC31 N863 - TC31 SC9 Report Kyoto

TC31 N862 - TC31 SC7 Report of the secretariat 03-2012

TC31 N861 - TC31 SC5 Report of the secretariat 03-2012

TC31 N860 - TC31 SC3 Report of the secretariat 03-2012

TC31 N859 - TC43 SC1 Items for TC31

TC31 N858 - TC31 WG6 Report ISO TC31 Plenary Kyoto

TC31 N857 - ISO Kyoto Final Schedule

TC31 N856 - TC22 SC19 Report to TC31 Plenary

TC31 N855 - RoV Systematic Review ISO 4223-2

TC31 N854 - RoV Systematic Review ISO 3887-4

TC31 N853 - RoV Systematic Review ISO 3887-3

TC31 N852 - TC149 Report to TC31 Plenary Feb2012

TC31 N851 - TC127 Report to TC31 Plenary Feb2012

TC31 N850 - Japan Proposed Draft Revision of ISO 4223-1 Amd 1

TC31 N849 - Japan Proposal for Revision of ISO 4223-1

TC31 N848 - US Proposal for Addition to ISO 4223-1

TC31 N847 - TC20 Report to TC31 Plenary

TC31 N846 - TC31 SC6 Report to TC31 Plenary

TC31 N845 - TC43 SC1 Report to TC31 Plenary Feb2012

TC31 N844 - Nomination of SC7 Chairman 2012-02-27

TC31 N843 - TC31 Secretariats Report - Kyoto March 2012

TC31 N842 - TC31 SC8 Report - Kyoto March 2012

TC31 N841 - TC31 WG1 Report to TC31 Plenary Feb2012

TC31 N840 - Revised TC 31 Plenary Agenda - Kyoto 2012 replaces N835

TC31 N839 - GOST Appeal to TC31 Question

TC31 N838 - TC31 SC10 Written Report to TC31

TC31 N837 - TC31 SC4 Written Report to TC31

TC31 N836 - USA Proposal Revisions to ISO 16392

TC31 N835 - TC31 Plenary Meeting Agenda - Kyoto 2012

TC31 N834 - TC31 Plenary Announcement Registration - Kyoto 2012[1]

TC31 N833 - RoV NWIP Pneumatic Tubes replaces N832

TC31 N832 - RoV NWIP Pneumatic Tubes

TC31 N831 - RoV Systematic Review ISO 16392

TC31 N830 - NWIP Pneumatic Tubes 2011-05-06

TC31 N829 - RoV TC31 SC3 and SC6 Chair Nomination

TC31 N828 - Response to Comment on DAmd1 ISO 4223-1

TC31 N827 - RoV TC31 SC5 Chairman Nomination

TC31 N826 - RoV and Com DAmd1 ISO 4223-1

TC31 N825 - RoV TC31 SC9 Chairman Nomination

TC31 N824 - Nomination of New SC5 Chairman

TC31 N823 - Report of Voting and Comments of NP/DTR 16377

TC31 N822 - Nomination of New SC9 Chairman

TC31 N821 - TC31 Meeting Report Baltimore

TC31 N820 - TC31 Final Resolutions - Baltimore

TC31 N819 - TC43 SC1 Liaison Report on ISO Draft 10 844

TC31 N818 - TC31 Agenda Revised - Baltimore

TC31 N815 - Systematic Review Summary ISO 1

TC31 N814 - Systematic Review Summary ISO 1

TC31 N813 - Nomination of TC31 Chairman

TC31 N812 - Response to Comments on CD Amd

TC31 N811 - ISO TC22 SC19 Liaison Report

TC31 N810 - TC31 SC7 Secretariat Report 2

TC31 N809 - TC31 SC5 Secretariat Report 2

TC31 N808 - TC31 WG6 Report 2010-05

TC31 N807 - TC31 SC4 Secretariat Report 2

TC31 N806 - TC31 SC10 Secretariat Report

TC31 N805 - TC31 SC9 Secretariat Report 2

TC31 N804 - TC31 SC3 Secretariat Report 2

TC31 N803 - TC31 SC8 Secretariat Report

TC31 N802 - TC31 WG1 Report-Baltimore

TC31 N801 - TC31 SC6 Secretariat Report

TC31 N800 - ISO TC127 Liaison Report April

TC31 N799 - ISO TR 16377 Further clarification of ISO 28580